Cranksets

- AL6061-T6 crank with steel chainrings - 7/8sp compatible - 177mm Q-factor - 48.5mm chainline

- AL6061-T6 crank with steel chainrings - 7/8sp compatible - 177mm Q-factor - 48.5mm chainline - Spindle Type: 120 SQR JIS

• Square taper interface • Only includes left crank

• Square taper interface • Only includes left crank • 175mm length

- Horizontal square interface - Only includes left crank

Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T

An integral part of the Shimano Ultegra 12-speed road lineup, the FC-R8100 crankset builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-speed shifting, the Ultegra crank is now offered in a wide variety of lengths, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanic requirements. - Optimal balance of stiffness, strength, weight and rotational performance - Hollowglide structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

The XX1 Eagle DUB crankset has been re-examined and re-engineered. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair

- Solid forged crank arm - Square interface - Aluminum - Speed: 10/11 - Chainline: 44mm

The e*thirteen e*spec Plus Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These alloy crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self-extractor bolt is built into both arms for easy removal - 6061 Aluminum - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No

The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self extractor bolt is built into both arms for easy removal - World-Cup DH-rated layup and construction - Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No

The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers

The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30

Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD

Shimano's Alivio mountain crankset offers smooth and precise shifting performance for trail focused riders. Its 2-piece design and narrow Q-factor provide quality, comfortable MTB riding.

The Shimano Alivio FC-T4010 crankset is an excellent replacement for your 9-speed triple chainring drivetrain. - Chainguard included - For Octalink V2 bottom brackets

- Material: Aluminum - Chain Compatibility: Super narrow HG 9 speed - Pedal Spindle: 9/16'' - Bottom Bracket: Not included - BB-UN26 or BB-UN55, 123mm

Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS

Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS

The Shimano FC-M371 crankset for square bottom brackets features a rigid 2-piece construction and Hyperdrive SG-X chainrings. - Chain guard included - 9-speed

Claris R2000 series cranks are clean and stylish; an ideal option for long touring, town cruising, and daily commuting. - Hyperglide technology ensures smooth and reliable shifting - 4-gear arm crank design - Includes crank arm fixing bolt - 150mm Q-factor

Claris R2000 series cranks are clean and stylish; an ideal option for long touring, town cruising, and daily commuting. - Hyperglide technology ensures smooth and reliable shifting - 4-gear arm crank design - Includes crank arm fixing bolt

The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down. - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

- 2-PIECE CRANKSET for 142 mm or 148 mm O.L.D. frames - DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention - Q-factor 172 mm - Direct mount chainring - Chain Line 52 mm - 1x12-speed