Parts & Accessories

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Monitor your speed as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin Connect online community or self-calibrate with an Edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit. ANT+ connectivity and BLUETOOTH Low Energy technology let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.

Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.

Be ready for any terrain with this Garmin Edge mountain bike mount designed specifically for bikes with short stems. It’s ideal for off-road riding when you may not want your Edge bike computer mounted in front of your handlebar.

Stay ahead of the pack with Garmin's Extended Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).

Protective Silicone case for Edge 1040 and 1040 Solar

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Light up the road Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. - Blendr is an elegant, integrated accessory mounting solution - Clip can be rotated for compatibility with many Bontrager accessories - Works with any Blendr-compatible stem and the accompanying base

Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

Quickly and easily swap your Bontrager or Trek cycling computers and wireless sensors between bicycles without tools with these silicone mounting straps. Large and small sizes ensure proper fit on most forks. • Designed for Bontrager and Trek analog wireless computers • Interchange analog wireless sensor installs and removes in seconds without tools • Interchange sensor includes both L and S silicone mounting straps to fit most forks • Batteries can be found in computer accessories

- Universal mounting for iPhone/Smart phone, cycling computers, GPS navigation units, Gopro, lighting systems, and other handlebar mounted accessories using a stock mounting bracket - Provides 50mm of additional out front mounting space - Quick slots enhance stability of zip-Ties and lock devices into a secure position - Accommodates multiple devices at once, I.E. Light and GPS - Carbon bar friendly - 31.8mm diameter handlebar clamp - Made in the USA (Patent pending)

BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.

Seamlessly connected. This SP Connect kit allows any smartphone case to be connected to the Intellimount Stem for a tidy dashboard on your bike. Highlights: - Fits most smartphone cases - Includes Intellimount adapter, adhesive mount and stand tool - Compatible with all SP products

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash